PharmaGelTM – PGA Series Ceiling Filter Modules
The standard PharmaGelTM module housing is fabricated from 0.063′′ thick aluminum with welded seams and equipped with 5⁄8′′ integral turned-out flanges for compatibility with either 11⁄2′′ tee bar grids or gypsum/plastered ceilings. Optional flanges of 304 stainless steel are available.
This ducted module is an excellent choice where Class 100 or better HEPA filtered air supplies are required. Housing and filters are shipped in separate cartons to ensure the HEPA filters are not installed until site conditions are “glove clean.”
PharmaGelTM – With Room Side Replaceable HEPA Filter
Designed for Pharmaceutical and Biotech Applications
The AAF Flanders PharmaGel HEPA filter ceiling module is ideal for applica- tions requiring an easily replaceable HEPA filter cartridge without risk of bypass leakage. An AAF Flanders gel sealant pocket ensures airtight integrity at the filter to module seal.
The PharmaGel module was designed with the pharmaceutical and biotech industries in mind. Filter cartridges can be tested and replaced without disturbing the module housing. The removable stainless steel perforated grill allows easy wipe down of the modules to prevent cross contamination of the product. Stainless steel trim is also available.
Hospital Realizes Cost Savings, Fewer Changeouts, and Less Odors with AAF Flanders VariCel M-Pak® Filters
Top Three Areas of Focus for Improving SOPs: Risk Reduction vs. Complication of Change
Ineffective SOPs are Cause of FDA 483’s Shut Down
PAO Compatible ePTFE Technology HEPA Filters for Cleanroom Pharmaceutical Applications
Hidden Dangers of HEPA Filter Leak Testing: The Risks are Hidden. The Consequences are Not.
BioPharm Company Studies, Tests, and Proves the Reliability of MEGAcel® II Filters
ePTFE Technology – Pharmaceutical and Isolator Applications
Hospital Filtration Survey Results in Improved Air Quality Upgrade with MEGAcel® I Filters
Standard Operating Procedures: They may be Standard. But are they Effective?