High Efficiency
Particulate Air Filters are the most efficient air filters
commercially available. They are used in cleanrooms and other
applications requiring ultra-clean air: semiconductor,
electronics, pharmaceutical manufacturing, food processing,
hospitals, and labs. Every AstroCel® filter is individually
tested before shipment to assure it meets rated efficiency and
resistance. AAF HEPA filters are available in a variety of
efficiencies - from 99.97% tested on .3 µm particles to
99.99995%, and higher, tested on .1 to .2 µm particles. All
filters are available scan tested.
AstroCel I - Designed for 125 FPM (5 7/8" deep) and 250
FPM (11 1/2" deep) filter face velocities at 1.0" W.G. initial
resistance. Available with a variety of cell side materials,
including particle board, plywood, steel, and aluminum. Gasket
seal and gel seal models. Separators are available in
corrugated or vinyl coated aluminum. Ultra-fine glass fiber
media.
AstroCel II LPD Series - Mini-pleat filter design using
ribbons of media for separators. Three pleat pack thicknesses
accommodate 125 FPM (2" deep),190 FPM (3" deep), and 250 FPM
(4" deep) filter face velocities at 1.0" W.G. initial
resistance. Standard cell sides are extruded aluminum. Gasket
seal and gel seal models. Ultra-fine glass fiber media.
Astrocel II LPD AFP-1-404C
PTFE Membrane
Filters For State-of-the-Art Cleanroom Requirements
The AAF
MEGAcel line of PTFE membrane filters is designed to meet
stringent semiconductor industry Cleanroom filtration
requirements for fab's, modular, mini and
microenvironments, as stated in the I300I specifications.
The MEGAcel was developed to provide extremely high
particulate efficiencies combined with low pressure drops
and negligible off-gassing properties.
Meets I300I Specifications
and is UL 900, Class 1, Approved Design
8 Pleats per Inch Allows for
Increased Media Content in Shallower Pack Depths
Superior Durability over
Conventional Media
TM-2, TM-2-CG,
TM-4, TM-4-CG
The TM-2 and TM-4 ducted modules are lightweight, disposable
HEPA filter ceiling modules. Both are designed for optimum
filter performance in cleanrooms with individually ducted
modules. TM-2 TM-4 Specs
AstroCel I - Designed for 125 FPM (5 7/8" deep) and 250
FPM (11 1/2" deep) filter face velocities at 1.0" W.G. initial
resistance. Available with a variety of cell side materials,
including particle board, plywood, steel, and aluminum. Gasket
seal and gel seal models. Separators are available in
corrugated or vinyl coated aluminum. Ultra-fine glass fiber
media.
The TM-2 and TM-4 ducted modules are lightweight, disposable
HEPA filter ceiling modules. Both are designed for optimum
filter performance in cleanrooms with individually ducted
modules.